Price for the A810 kit as detailed above: US$370.00

Price for the B67 kit as detailed above: US$292.00

For the moment, we offer two Studer reel to reel deck upgrade kits, for the Studer B67 MKI & MKII and the Studer A810. Our kits cover the 'standard' pcb's used in both models. Yet even with those 'standard' versions, many variations were produced covering changes and improvements over the life of each models production. The version/type number pcb's in our kits are clearly marked below. You MUST check your decks pcb version/type number against the lists below to make sure we send you the correct kit/parts for YOUR version pcb.

The price of the kit may change once you have advised us of the pcb version/type number of your deck.

It is extremely important that you take note of the above steps, as we will add handling charges if you have ordered the wrong version pcb kit and we need to send you extra or different parts.

If your version of the B67 and the A810 have optional pcb's fitted and you also wish to upgrade those pcb's, you will need to e-mail us the model/version number of those pcb's and we will add them to your kit with the relevant additional pricing.

Like all our other Revox upgrade kits, we only use high quality Nichicon Gold Series Audio electrolytic capacitors (the tantalum capacitors will also be replaced by electrolytic capacitors) and other name brands such as Panasonic, Illinois Capacitors etc for axial style capacitors.

We DO NOT use any cheap Asian brand capacitors.

We proudly use Mouser as our main supplier, 98% of the parts used in our kits are purchased from Mouser, so you can be assured that all parts are original, no cheap and nasty copies! 

These kits will take about a week to put together and to ship out to you.

Please note: transistors are NOT included with these Studer kits. If you need specific transistors, please let us know and we will advise if we can help you with those specific transistors.

When ordering, please advise if you have a B67 MKI or MKII deck. As well, the above kits are for a STEREO B67. If you have a mono, please let us know.

To place an order for the Studer B67 kit, please click on the PayPal 'Add to Cart' button below, and shipping will be added.

Please note, shipping is to the lower 48 only! For all other areas, please contact us for additional shipping charges.

This is a very large kit and it will take us 5 working days to put together, perhaps more if we need to order in parts for any special pcb's your B67 may have, so please keep this in mind!

To place an order for the Studer A810 kit, please click on the PayPal 'Add to Cart' button below, and shipping will be added.

Please note, shipping is to the lower 48 only! For all other areas, please contact us for additional shipping charges.

This is a very large kit and it will take us 5 working days to put together, perhaps more if we need to order in parts for any special pcb's your A810 may have, so please keep this in mind!

 Studer reel to reel deck Upgrade Kits

The B67 upgrade kit covers the following pcb's:

Again, PLEASE make sure you e-mail us the details if your decks pcb's differ to the ones listed below or you require a kit for any special pcb your deck may have! Also take note of the final two digit extension of a specific pcb number, such as -00 or -81 etc, as there can be quite some differences on a particular pcb between the various two digit extension numbers!

​With our kit, we ONLY supply the motor run capacitors for 60Hz, ie USA operation. If your B67 is used in a country with 50Hz operation, please advise us!


- Monitor Amp 1.067.745
- Sync Amp 1.167.714
- Mono Stereo Switch 1.167.720
- Overload Detector, 2 CH 1.067.722
- Reproduce Amp 1.167.710/715 - this kit will cover two of these pcb's
- Record Amp 1.167.711/716 (high & low speed) - this kit will cover two of these pcb's
- Counter 1.167.765
- Oscillator 1.067.712

- Capstan Speed Control 1.167.770/771 (high & low speed)
- Capstan Motor Control 1.067.775 low speed OR 1.167.776 high speed.  <--PLEASE INDICATE WHICH ONE YOU HAVE

- Variable Speed Control 1.167.780

- Spooling Motor Control, 1.067.135 take up & supply

- Potentiometer Board 1.167.758

- Sensor Board 1.167.767

- Tape Transport Control 1.167.759 OR 1.167.761 <-- PLEASE INDICATE WHICH ONE YOU HAVE


The A810 upgrade kit covers the following pcb's:

Again, PLEASE make sure you e-mail us the details if your decks pcb's differ to the ones listed below or you require a kit for any special pcb your deck may have! Also take note of the final two digit extension of a specific pcb number, such as -00 or -81 etc, as there can be quite some differences on a particular pcb between the various two digit extension numbers!


- Line Amplifier 1.820.714-81 - this kit will cover two of these pcb's
- Reproduce Amplifier 1.820.710-81 - this kit will cover two of these pcb's
- Record Amplifier 1.820.712-81 - this kit will cover two of these pcb's
- HF Driver 1.820-713-11 or 12 - this kit will cover two of these pcb's
- M/S Switch 1.820.720/724
- Code Delay Unit 1.820.722-00 or 81
- Code Read/Write unit 1.820.721
- Bus Convertor 1.810.754-00

- Bus Connector 1.820.701-00
- Periphery Controller 1.810.753-00

- Serial REM Controller 1.810.751-00 or 81 or 82

- Tape Deck Controller 1.810.750-00 or 02

- MP Unit 1.810.752-00

- Basis PCB 1.810.700-00 or 81

- Capstan Controller 1.810.761-00

- Display 1.810.768-00

- Master Control 1.810.733-00

- Monitor Amp 1.810.722-11 or 12

- Power Supply Unit 1.820.210-00

- Spooling Motor Control 1.810.760-81 or 82

- Stabilizer 1.810.7670-00 or 81

- Tape Move Sensor 1.810.750-00

- Tape Tension Left 1.810.730-81 or 82

- Tape Tension Right 1.810.728-81 or 82

- VU Meter Amp 1.810.730-11 or 12 - this kit will cover two of these pcb's